CW Side/Offset
Freq (MENU_SIDETONE_FREQUENCY)
Sidetone Frequency (also
Offset frequency, see CW
Freq. Offset below)
CW Paddle Reverse (MENU_PADDLE_REVERSE)
Dit is Dah and Dah is Dit. Use
if your keyer needs reverse
meaning of the paddles.
CW TX->RX Delay (MENU_CW_TX_RX_DELAY)
How long to stay in CW TX
mode after stop sending a
signal.
CW Freq. Offset (MENU_CW_OFFSET_MODE)
TX: display is TX frequency if
received frequency was zero-
beated. DISP: display is RX
frequency if received signal is
matched to sidetone. SHIFT:
LO shifts, display is RX
frequency if signal is matched
to sidetone.
CW LSB/USB
Select (MENU_CW_AUTO_MODE_SELECT)
Set appropriate sideband
mode for CW. If AUTO,
sideband is chosen for bands
by its frequency. A long press
on Mode button gets the
other sideband mode
CW decoder enable (MENU_CW_DECODER)
enable experimental CW
decoding
Signal threshold (MENU_CW_DECODER_THRESH)
All signals above this
threshold are interpreted as a
dit or daah
To Next Page
Loading...