Provided functionalities .................................................................................................................... 96
Enabling/Disabling USB CAT/AUDIO............................................................................................. 97
Programs known to work ................................................................................................................. 97
Programs for controlling the rig ................................................................................................. 97
Programs used to receive/transmit digital modes ................................................................. 97
Programs used to receive/transmit CW .................................................................................... 98
SDR Programs for use with IQ Data ........................................................................................... 98
Installation on Windows XP - 8.1 ................................................................................................... 99
Windows Vista and newer ............................................................................................................ 99
Windows XP ..................................................................................................................................... 99
FAQ......................................................................................................................................................... 99
I can see the Speaker/Microphone device but no sound is coming from/going to the
mcHF. I have used an experimental firmware with USB Audio before. .......................... 100
When I start transmitting using CAT, TX LED goes on for a very short time and then
goes off. .......................................................................................................................................... 100
Linux: I can see the /dev/ttyACM0 device, but it still does not work with the programs
like fldigi. ........................................................................................................................................ 100
When I use CW-L and CAT, every frequency change via CAT switches to CW-U. Why?
.......................................................................................................................................................... 101
WSJT-X sound does not work with Ubuntu/Xenial 16.04, - (fldigi works well) ........... 101
McHF driver & Windows 8 64bit .............................................................................................. 101
Product Description: ........................................................................................................................ 103
To Next Page
Loading...