Wfall Contrast (MENU_WFALL_CONTRAST)
Adjust to fit your personal
input level range to
displayable color range for
waterfall
Upper Meter Colour (MENU_METER_COLOUR_UP)
Set the color of the scale of
combined S/Power-Meter
Lower Meter
Colour (MENU_METER_COLOUR_DOWN)
Set the color of the scale of
combined SWR/AUD/ALC-
Meter
dBm display (MENU_DBM_DISPLAY)
RX signal power (measured
within the filter bandwidth)
can be displayed in dBm or
normalized as dBm/Hz. This
value is supposed to be
quite accurate to +-3dB.
Preferably use low spectrum
display magnify settings.
Accuracy is lower for very
very weak and very very
strong signals.
dBm calibrate (MENU_DBM_CALIBRATE)
dBm display calibration. Just
an offset (in dB) that is
added to the internally
calculated dBm or dBm/Hz
value.
Freq display font (MENU_FREQ_FONT)
Font selection for frequency
display. Allows selection of
old/modern fonts
To Next Page
Loading...