Recent RS-918SSB - Page 55

LABEL (NR)
DESCRIPTION
Reduce Power on High
Bands (CONFIG_REDUCE_POWER_ON_HIGH_BANDS)
If set frequencies above
8Mhz (30m or higher)
require higher power adjust
values (four times). This
permits better control of
generated power on these
frequencies.
PA Bias (CONFIG_PA_BIAS)
Defines the BIAS value of
the PA. See Adjustment and
Calibration for more
information.
2200m 5W PWR
Adjust (CONFIG_2200M_5W_ADJUST)
Defines the internal power
adjustment factor to
achieve 5W power on this
band. See Adjustment and
Calibration for more
information.
630m 5W PWR
Adjust (CONFIG_630M_5W_ADJUST)
Defines the internal power
adjustment factor to
achieve 5W power on this
band. See Adjustment and
Calibration for more
information.
160m 5W PWR
Adjust (CONFIG_160M_5W_ADJUST)
Defines the internal power
adjustment factor to
achieve 5W power on this
band. See Adjustment and
Calibration for more
information.