Record CG3 - Operating Modes and User Interface

11
6.2 View / Manually Set Calibration Value
Next, the current calibration setting will be displayed (figure 16). You have the option
to: a) manually change the current calibration setting, or b) skip changing the calibration
value (in order to proceed to the calibration procedure).
Figure 7: Current calibration setting
a) To adjust the current calibration setting:
 Press .
 Use the , , and buttons to adjust the setting.
 Press to enter the value into memory. This will then return the taximeter
to Vacant Mode
b) To skip adjusting the existing calibration, simply press . This will
automatically advance the taximeter into the Calibration Procedure (see the next
step).