5.0 Programming Rates
Button functions are shown
to the left. A flashing cursor on
the $Fare display indicates
which digit can be adjusted. Use
the buttons to set and navigate
the rate values sequentially.
The left-hand ($EXTRA) display indicates the current value being adjusted
The right-hand ($FARE) display holds the actual value being adjusted.
Pressing the button enters each value into memory, and will automatically
advance the menu forward to the next item in sequence.
The rate programming is divided into 2 parts: the Common Rate, and the Individual
Rates Section (Note: the values shown here are only for example).
Common Rate Section:
1. - Number of Rates (Max. 6)
2. - Extra Charges
3. - Total Allowed Extras
4. - Cab Number
5. - Tax %
6. - Tax Type:
0 – Entry will split out tax at end of fare
1 – Entry will add tax at end of fare.
7. Distance Controlled Rate Change*
8. Time Controlled Rate Change*
* Not used with regular rates. Unless directed, leave these values as zero. Improperly setting these will
cause problems with your rate(s).
To Next Page
Loading...
