Need help?Do you have a question about the Record R 62 and is the answer not in the manual?
Explains the meaning and usage of various warning symbols in the manual for better understanding.
Defines the system's exclusive use as a pedestrian passage and liability for misuse.
Lists hazards caused by the system, emphasizing adherence to country-specific regulations and sensor detection range.
Details system development based on current technology and safety regulations, mentioning relevant standards.
Describes personal protective equipment required for health and safety during system operations and maintenance.
Guarantees operation with manufacturer parts and disclaims liability for unauthorized modifications.
Highlights the manual's role in efficient and safe system handling, emphasizing accessibility and operator understanding.
States the copyright holder and prohibits unauthorized reproduction or distribution of the manual.
Instructs users to find product identification details on the nameplate located on the door.
Provides the contact information and address of the manufacturer, BLASI GmbH.
Identifies the intended users of the manual, including system operators and maintenance personnel.
Defines key terms used throughout the manual, such as System, User, and Qualified Personnel.
Presents the Service Display, its menu access via rotary switch, and scrolling/selection methods.
Provides instructions for connecting the Service Display, emphasizing the 'ON/OFF' switch position.
Details how to connect the Service Display to the column's 9-pin socket after removing the protective cap.
Guides user through configuring the Service Display for communication with the PLC, including setup and baudrate settings.
Explains menu access protection by a code and how to proceed for viewing or modifying settings.
Details various parameter settings for the Service Display, categorized by function like Operating Modes and Alarming.
Describes information displayed on the Service Display's page layout, including security, version, info, time, and date.
Provides a structured overview of key parameters, their factory settings, and descriptions.
To Next Page
General