red lion CR1000 User Manual


Inside US: +1 (877) 432-9908 Bulletin No. CR1000-A
Outside US: +1 (717) 767-6511 Drawing No. LP1019
www.redlion.net Effective 2017-09-26
-1-
ModelCR1000‐IndustrialOperatorInterf aceWithTFTDisplay
• CONFIGURED USING CRIMSON
®
3.1 SOFTWARE
• TWO SERIAL COMMUNICATION PORTS,
(1 RS-232 and 1 RS-232/422/485)
• 10 BASE T/100 BASE-TX ETHERNET PORT COMMUNICATES
WITH UP TO FOUR PROTOCOLS SIMULTANEOUSLY
• UNIT’S CONFIGURATION IS STORED IN NON-VOLATILE FLASH
MEMORY
• SD CARD SOCKET FOR LOADING DATABASE IN FIELD
• INDUSTRIAL TFT LCD COLOR DISPLAY
• NEMA 4X/IP66 FRONT PANEL
• THREE FRONT PANEL LED INDICATORS
• POWER UNIT FROM 24 ±20% VDC
• RESISTIVE ANALOG TOUCHSCREEN
GENERALDESCRIPTION
The CR1000 is the perfect solution for applications that require the
operator to monitor and control more than just a single device. With two
serial ports and an Ethernet port, these HMI displays can connect to
multiple serial and Ethernet devices simultaneously, including PLCs,
motor drives, bar code scanners, etc.
The CR1000 performs the functions of a multiple protocol converter,
using two high-speed serial communications ports and a 10/100 Base-
TX Ethernet port. The Ethernet port supports up to four protocols
simultaneously, allowing dissimilar Ethernet based products to
communicate with one another. The SD card slot can be used to load the
unit's configuration file, allowing configuration changes to be made and
saved to the card for later transfer.
The CR1000 range of HMIs is programmed with Red Lion's free
Crimson 3.1 software. Crimson offers easy to use drag and drop
communications configuration, while the embedded image library allows
the programmer to create intuitive screens and prompts for the operator.
CONTENTSOFPACKAGE
- CR1000 Operator Interface
- Hardware packet and plate for mounting unit into panel
- Terminal block for connecting power
- Panel gasket
SAFETYSUMMARY
All safety related regulations, local codes and instructions that appear
in the manual or on equipment must be observed to ensure personal
safety and to prevent damage to either the instrument or equipment
connected to it. If equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
Do not use the unit to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially
harmful to persons or equipment in the event of a fault to the unit.
WARNING - EXPLOSION HAZARD - DO NOT D
EQUIPMENT UNLESS POWER HAS BEEN SW
OR AREA IS KNOWN TO BE NON-HAZARDOU
CAUTION: Risk of Danger.
Read complete instructions prior to installation
and operation of the unit.
C
US LISTED
U
L
R
IND. CONT
. EQ.
34AD
ORDERINGINFORMATION
1
Contact your Red Lion distributor or visit our website for selection of SD
cards, adapters and cables.
MODEL NO. DESCRIPTION PART NUMBER
CR1000
4.3" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 04000 00210
7.0" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 07000 00210
10.4" HMI with 2 Serial Ports, 1 Ethernet Port, and USB Device Port CR1000 10000 00210
SD
SD Card
1
SDxxxxxx
CBL
Communications Cables and Adapter
1
CBLxxxxx
FILM
Protective Film for CR1000 04xxx xxxxx G3FILM4K
Protective Film for CR1000 07xxx xxxxx G3FILM07
Protective Film for CR1000 10xxx xxxxx G3FILM10
CRA000
Adapter Plate from Kadet 7 to CRX000 07 CRA000 AD070 70000
Replacement Battery CRA000 BT3V0 00000

red lion CR1000 Specifications

General

Brand	red lion
Model	CR1000
Category	Recording Equipment
Language	English