red lion RLSP33PED User Manual

redlionproducts.com
THERMOPLASTIC PEDESTAL SUMP PUMP
RLSP33PED
Owner’s Manual
Table of Contents
SAFETY INSTRUCTIONS - - - - - - - - - - - - 2
PRODUCT DESCRIPTION - - - - - - - - - - - - 4
Model - - - - - - - - - - - - - - - - - - - 4
Flow Rates - - - - - - - - - - - - - - - - - 4
Specifications- - - - - - - - - - - - - - - - 4
INSTALLATION - - - - - - - - - - - - - - - - 5
Physical Installation- - - - - - - - - - - - - 5
Typical Installation - - - - - - - - - - - - 5
Assemble the Float Mechanism - - - - - - 6
Pump Installation - - - - - - - - - - - - - 6
Connect Discharge Piping - - - - - - - - - 6
Electrical Connections- - - - - - - - - - - - 7
Wiring Guidelines - - - - - - - - - - - - - 7
OPERATION TESTING - - - - - - - - - - - - - 7
Test the Pump - - - - - - - - - - - - - - - 7
MAINTENANCE - - - - - - - - - - - - - - - - 8
Periodic Service - - - - - - - - - - - - - - 8
Cleaning the Impeller and Volute- - - - - - 9
Troubleshooting - - - - - - - - - - - - - - 9
LIMITED WARRANTY - - - - - - - - - - - - - 10

red lion RLSP33PED Specifications

General

Model	RLSP33PED
Category	Water Pump
Horsepower	1/3 HP
Power	250 W
Voltage	115V
Phase	Single
Maximum Head	25 ft
Max Head	25 ft
Cord Length	10 ft
Material	Thermoplastic
Discharge Size	1.5 in
Outlet Size	1.5 in

Summary

Safety Instructions

Hazard Message Definitions

Explains DANGER, WARNING, CAUTION, NOTICE, IMPORTANT, and NOTE message formats and associated symbols.

Before Installation Safety

Guidance for qualified personnel and potential hazards before operating the pump.

Electrical Shock Hazards

Warns about high voltages and necessary precautions to prevent electric shock.

Operational Risk Notices

Notices regarding pump usage, potential damage, and conditions to avoid.

Product Description

Model Specifications

Details on pump model, HP, Amps, Voltage, Float Type, and basin dimensions.

Performance Data

Information on flow rates at different head levels and technical specifications.

Installation

Physical Installation Guide

Overview and diagram for the physical setup of the sump pump in a basin.

Float Mechanism Assembly

Step-by-step instructions for assembling the float and float stem components.

Pump and Piping Installation

Procedures for installing the pump in the basin and connecting discharge piping.

Electrical Connections and Wiring

Guidelines for safe and proper electrical hookup, including GFCI and circuit requirements.

Operation Testing

Pump Operation Test

Procedure to test the pump's functionality by adding water and activating the float switch.

Maintenance

Periodic Service Recommendations

Schedule and checklist for routine inspection and testing of the pump system.

Cleaning Impeller and Volute

Instructions for periodic cleaning of the pump's internal components for optimal performance.

Troubleshooting

Common Pump Issues and Solutions

Table identifying problems, probable causes, and corrective actions for pump malfunctions.

Limited Warranty

Warranty Coverage Period

Details the duration of the product's warranty from the date of original purchase.

Warranty Exclusions

Lists conditions and circumstances under which the warranty is not applicable.