PRODUCT DESCRIPTION
Model
4
PRODUCT DESCRIPTION
This pump is for use in basins or lift stations and is suitable for pumping clear water and other non-explo-
sive, non-corrosive liquids. Do not use the pump in applications where sewage or any other debris (gravel,
sand, floating debris, etc.), abrasives, or corrosives are present.
These products have been carefully tested, inspected, and packaged to ensure safe delivery and operation.
Please examine your pump carefully to ensure that no damage occurred during shipment. If damage has
occurred, please contact the place of purchase. They will assist you in replacement or repair, if required.
This pump is designed for domestic household service only. Total pump run time should be two hours or less
per day.
The pump motor is equipped with an automatic resetting thermal protector, and may restart unexpectedly.
Thermal Protector tripping is an indication of motor overloading or overheating, which can be caused by
application issues such as an obstructed pump impeller, float stuck in the ON position, pump running dry,
pump air-locked, pump short cycling, excessively high or low voltage supply, or possibly a pump, motor,
bearings, or seal that have reached the end of their useful life.
Model
Flow Rates
Specifications
Model HP Amps Voltage Float Type On/Off Levels
Minimum Basin
Diameter
Minimum
Basin Depth
Maximum
Basin Depth
RLSP33PED 1/3 4.0 115 Snap Action
8"- 10" (203 - 254 mm)/
3”- 5” (76 - 127 mm)
13” (330 mm) 18” (457 mm) 24” (610 mm)
Gallons/Liters per Hour
At Height: (Head) 0 ft (0 m) 5 ft (1.5 m) 10 ft (3 m) 15 ft (4.5 m) Shut Off
RLSP33PED 3300 / 12492 2800 / 10599 2040 / 7722 600 / 2271 16 ft (4.9 m)
Discharge Size 1-1/4" FNPT
Intake Size 1/6" (4.2 mm) screened opening
Pump Housing Polypropylene (including volute)
Impeller Polybutylene terephthalate, top intake, non-clog
Motor 1/3 hp, PSC, 115 V, 60 Hz, 1725 RPM
Hardware Zinc plated steel
Bearings Ball bearings
Power Cord 18" (457 mm) AWG 3-Conductor Copper, Stranded, 8' Length (2.4 m)
Pump Shaft PVC
To Next Page
Loading...
Need help?
General
