Congratulations and thank you for your purchase of a RED ONE™ camera. Before un-
packing and assembling the camera body and any accessories, please review the QUICK
START GUIDE. If there is any physical damage to your camera or accessories, please
contact us immediately at info@red.com.
The following instructions will outline basic assembly of the RED ONE™ camera body,
RED™ BASE PRODUCTION PACK, RED™ LCD,
REDFLASH™, RED DRIVE®, RED
BRICK®, and RED™ Lens.
For additional information refer to the latest version of the RED ONE
TM
CAMERA: OPERA-
TIONS GUIDE located at www.red.com/support.
Included with the RED ONE™ Camera Body are:
• 1 - Mini XLR Adaptor
• 1 - SD Card
• 1 - Min-XLR-to-Mini-XLR Cable
• 1 - BNC-to-DIN Cable
• 1 - Bolt Set (includes tools)
Included with the RED™ BASE PRODUCTION PACK are:
• 1 - Bottom Plate
• 1 - Bolt Set (includes tools)
• 1 - Cradle Assembly
• 1 - Right Handle
• 1 - Shoulder Dovetail
• 1 - Top Handle
• 1 - Top Mount
• 1 - Universal Mount
• 2 - 18” Stainless Rods
Included with the RED™ LCD are:
• 1 - LCD
• 1 - 5” Arm
• 1 - LCD Cable
Additional accessories are available for purchase to create the perfect camera to t
your exact needs. Log on to www.red.com/store.
RED ONE™ Shown With Base
Production Pack Installed
CAMERA / ACCESSORY COMPONENTS
To Next Page
Loading...
Need help?
General
