Need help?Do you have a question about the Redarc BCDC1225D and is the answer not in the manual?
General| Output Current | 25A |
|---|---|
| Solar Input | Yes |
| MPPT Solar Regulator | Yes |
| Output Voltage | 12V |
| Battery Chemistry | AGM, Gel, Calcium, LiFePO4 |
| Efficiency | 96% |
| Charger Type | DC to DC |
| Protection Features | Reverse polarity, Short circuit, Over Temperature |
| Input Voltage | 9-32V DC |
Description of the LEDs and indicators on the charger's front panel.
Explanation of the different charging profiles for various battery types.
Details on how LEDs indicate charging status, solar/vehicle input, and stage.
Explanation of the multi-stage charging process for Lead Acid and LiFePO4 batteries.
Voltages required to turn the charger on and off based on input type.
List of LED flashing sequences and their corresponding error code meanings.
Recommendations for mounting the charger for optimal performance and safety.
How to connect the ORANGE wire to select the correct battery charging profile.
How to connect the BLUE wire for standard or low voltage vehicle input triggering.
Recommended wire sizes for vehicle input, solar, ground, and output connections.
Guidance on making secure and low-resistance electrical connections for the charger.
Information on selecting appropriate MIDI fuses for reliable circuit protection.
Diagrams showing typical wiring for Lead Acid and LiFePO4 battery installations.
Troubleshooting steps when none of the charger's LEDs are on.
Diagnosing issues when the charge profile LED indicates a fault.
Steps to take when the 'Solar' LED is off despite solar input.
Steps to take when the 'Vehicle' LED is off despite vehicle connection.
Information on the warranty period and what is covered by Redarc.
Factors that may void the warranty or are not covered.
Other terms and conditions that apply to the product warranty.
To Next Page
