EasyManua.ls Logo

Redarc BCDC1212T User Manual

Redarc BCDC1212T
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BCDC
®
Multi-Stage 12 V Input Current
Limited In-Vehicle Battery Charger
MODEL:
BCDC1212T
Question and Answer IconNeed help?

Do you have a question about the Redarc BCDC1212T and is the answer not in the manual?

Redarc BCDC1212T Specifications

General IconGeneral
Input Voltage Range9 - 32VDC
Output Voltage12V
Output Current12A
Maximum Output Current12A
Maximum Input Current20A
Operating Temperature-20°C to +70°C
EfficiencyUp to 95%
Battery Type CompatibilityAGM, Gel, Calcium, Lithium
Charger TypeDC-DC Battery Charger
Protection FeaturesOver-temperature protection, Reverse polarity protection, Short circuit protection

Summary

PRODUCT OVERVIEW

SAFETY INSTRUCTIONS

SAFETY MESSAGE CONVENTIONS

Explains hazard levels indicated by safety message signal words like Warning, Caution, and Notice.

PERSONAL SAFETY PRECAUTIONS

SPECIFICATIONS

PRODUCT FUNCTION

DISPLAY PANEL

Describes the 7 LEDs on the front panel for charge profile and status indication.

CHARGE PROFILE LEDS

Explains the 4 charging profiles and how their LEDs indicate status (ON/charging, flashing/standby).

CHARGE STATUS LEDS

Details the Vehicle LED and Stage LEDs indicating charging stage (Boost, Absorption, Float).

CHARGING PROCESS

Outlines the three stages of charging: Boost, Absorption, and Float, with diagrams.

BATTERY TEST MODE

Explains the unit's periodic battery test for input conditions and output presence.

TURN ON/OFF THRESHOLDS

Lists voltage thresholds for turning the charger ON/OFF under various conditions.

ERROR CODES

Details LED flashing sequences indicating specific fault conditions and their descriptions.

PRIOR TO INSTALLATION

INSTALLATION LOCATION

Advises on choosing suitable mounting locations, considering temperature and airflow.

CABLE SIZING

Provides recommended cable cross-sections and gauge sizes for installation.

FUSING

Recommends MIDI style bolt-down fuses and advises against blade types or circuit breakers.

INSTALLATION

AUXILIARY BATTERY CONNECTION – BROWN CABLE

Details connecting the BROWN cable to the auxiliary battery's positive terminal.

COMMON GROUND CONNECTION - BLACK CABLE

Explains connecting the BLACK cable to a common ground point for all components.

START BATTERY CONNECTION – RED CABLE

Guides connecting the RED cable to the start battery's positive input via a fuse.

CHARGE PROFILE CONNECTION – ORANGE CABLE

Describes how to connect the ORANGE cable to select the correct charge profile (A, B, C, LiFePO4).

VEHICLE IGNITION INPUT – BLUE CABLE

Explains connecting the BLUE cable for variable-voltage alternators or leaving it disconnected for fixed ones.

STANDARD SETUP

Shows typical wiring diagrams for Lead Acid and LiFePO4 battery setups.

TROUBLESHOOTING

FREQUENTLY ASKED QUESTIONS

FCC DECLARATION

WARRANTY

LIMITED WARRANTY

Provides information on the limited warranty and directs users to the website for full terms.

IMPORTER CONTACT INFORMATION

Lists contact details for UK and European importers of the product.

Related product manuals