Product Overview | 3
PRODUCT OVERVIEW
The BCDC1212T In-vehicle Battery Charger
features technology designed to charge your
auxiliary batteries to 100%, regardless of their
type or size. The In-vehicle Battery Charger is
suitable for all common types of automotive lead
acid batteries and LiFePO
4
lithium type batteries.
WARNINGS AND SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS — This manual contains important safety instructions for the
BCDC1212T Battery Charger.
Do not operate the Battery Charger unless you have read and understood this manual and the
Charger is installed as per these installation instructions. REDARC recommends that the Charger be
installed by a suitably qualified person.
SAFETY MESSAGE CONVENTIONS
Safety messages in this manual include a signal word to indicate the level of the hazard as follows:
WARNING
Indicates a potentially hazardous situation which could result in death or
serious injury to the operator or to bystanders.
CAUTION
Indicates a potentially hazardous situation which may result in moderate
or minor injury to the operator or to bystanders.
NOTICE
Indicates a situation that may cause equipment damage.
WARNING
RISK OF EXPLOSIVE GASES: Working in vicinity of a Lead-Acid battery is dangerous.
Batteries generate explosive gases during normal operation. For this reason, it is of utmost
importance that you follow the instructions when installing and using the Charger.
To Next Page
Loading...
Need help?
General
