Need help?Do you have a question about the Redarc BCDC1250D and is the answer not in the manual?
General| Input Voltage Range | 9 - 32VDC |
|---|---|
| Maximum Output Current | 50A |
| Charging Profile | Multi-stage (Bulk, Absorption, Float) |
| Efficiency | Up to 96% |
| Battery Types | AGM, Gel, Lithium |
| Protection Features | Over temperature, Over voltage, Short circuit |
| Operating Temperature Range | -20°C to +80°C |
| Standby Current Draw | 10mA |
Covers risks of explosive gases near batteries and general cautionary advice for safe operation.
Details on eye protection, clothing protection, and handling battery acid for user safety.
Describes the front panel LEDs used to display charge profile and charge status.
Explains the 4 charging profiles and how LEDs indicate selection and standby modes.
Details the LEDs indicating available inputs and the current stage of the charging process.
Lists input voltage conditions for the charger to turn on and off for different vehicle types.
Explains LED flashing sequences that indicate specific fault conditions and their meanings.
Describes the automatic battery test performed every 100 seconds to check input conditions and battery presence.
Guidance on where to mount the charger for optimal performance and safety in the vehicle.
How to use the ORANGE wire to select the correct charging profile for the specific battery type.
How to use the BLUE wire to set vehicle input trigger modes (Standard/Low Voltage) for alternators.
Table outlining recommended cable sizes based on length and part number for input/output connections.
Recommendations for making reliable, low-resistance electrical connections for heavy gauge wires.
Guidance on selecting appropriate MIDI style bolt-down fuses for low resistance connections.
Diagrams illustrating typical wiring for Lead Acid and LiFePO4 battery setups.
To Next Page
