What to do if my REDCAT ASCENT FUSION won't steer or move?
If your REDCAT Motorized Toy Car won't steer or move, first, ensure the battery pack is fully charged. If that's not the issue, check the battery wires to make sure they are securely plugged in. Finally, confirm that you followed the correct start-up procedure.
Why does the motor on my REDCAT Motorized Toy Car suddenly stop working?
If your REDCAT Motorized Toy Car motor suddenly stops working, make sure the transmitter has good batteries and is turned on. Also, check the battery voltage and the ESC temperature. Let it cool and recharge the battery if needed.
How to fix a REDCAT Motorized Toy Car that turns to the side automatically?
If your REDCAT Motorized Toy Car is turning to the side automatically, adjust the transmitter steering trim. If that doesn't resolve the issue, check the servo horn and replace it if it's worn or stripped. It could also be that the servo gears are stripped, in which case you should replace the servo.
Why is my REDCAT Motorized Toy Car running backward when I pull the throttle?
If your REDCAT Motorized Toy Car runs backward when you pull the throttle trigger, the radio “Throttle Reverse” switch may be improperly set, so switch the radio “Throttle Reverse” switch. Also, be sure the motor direction is set correctly in the ESC.
What to do if my REDCAT Motorized Toy Car moves with no throttle input?
If your REDCAT Motorized Toy Car moves without any throttle input, the throttle trim may not be set properly, so set the transmitter throttle trim. Alternatively, the transmitter might need to be calibrated, so calibrate the transmitter.
Why is there a clicking noise when steering my REDCAT Motorized Toy Car?
If you hear a clicking noise while steering your REDCAT Motorized Toy Car, the servo horn might be stripped, so replace it. Alternatively, the servo gears could be stripped, so replace the servo.
What to do if the indicator light is off and the motor is irresponsive on my REDCAT Motorized Toy Car?
If the indicator light is not on after powering on the ESC of your REDCAT Motorized Toy Car, but the motor is irresponsive, make sure there's a good connection between the battery and the ESC. Also, be sure the battery is charged and undamaged. If these steps don't resolve the issue, replace the switch.
Why does my REDCAT Motorized Toy Car steer to the left when I steer to the right?
If your REDCAT Motorized Toy Car steers to the left when you steer to the right, set the steering reverse on the transmitter. Also, consider that you might be driving towards yourself, which can make the steering seem backwards. Practice driving the vehicle to get used to steering with different vehicle orientations.
How to troubleshoot an ESC that won't power on in my REDCAT ASCENT FUSION?
If the ESC will not power on for your REDCAT Motorized Toy Car, ensure a fully charged LIPO battery is plugged into the ESC. If that doesn't work, contact Redcat support.
What does it mean when the green light flashes N times and the red light flashes quickly on my REDCAT Motorized Toy Car?
If the green light flashes N times and the red light flashes quickly after powering on your REDCAT Motorized Toy Car, make sure the ESC is plugged into the receiver (CH2) correctly and that the radio is turned on. Also, ensure the throttle is in a neutral position and recalibrate the throttle range on the ESC.
General| Scale | 1/10 |
|---|---|
| Drive | 4WD |
| Motor Type | Brushed |
| Radio System | 2.4GHz |
| Controller Type | Pistol Grip |
| Run Time | 20 minutes |
| Terrain | Rock, Gravel, Grass |
Lists essential parts included and required for operation.
Provides links to the full manual and electric vehicles manual.
Crucial safety guidelines, age/responsibility, and general warnings.
Detailed warnings regarding battery handling, charging, and risks.
Chart of default ESC/motor settings for quick reference.
Illustrated steps for initial setup and powering on the vehicle.
Illustrates vehicle steering and throttle actions.
Steps for safely turning off the vehicle and radio.
Covers servo reverse, trim, and endpoint adjustments.
Identifies and labels all parts of the RTX-4C radio transmitter.
Details FCC/IC compliance and AFHDS technology overview.
Shows wiring and steps for binding the transmitter to the receiver.
Procedure to calibrate neutral positions for throttle and steering.
Explains channel assignments, modes, reverse, and trim functions.
Adjusting travel limits, failsafe, and beginner mode settings.
Technical specifications and key features of the integrated ESC/Motor system.
Important safety warnings related to wiring, connections, and temperature.
Illustrates ESC wiring and how to interpret power status indicators.
Detailed procedure for calibrating the ESC's throttle range.
Explains cutoff voltage, motor rotation, drag brake, and more.
Table showing the default settings for ESC programmable items.
Instructions for connecting and using the LED program box.
Steps for factory reset and automatic motor pairing.
Solutions for ESC power, motor, and indicator light problems.
Diagnosing issues with vehicle movement, steering, and throttle input.
Guide on disassembling the transfer case and changing underdrive gears.
Steps for installing new gears and reassembling the transfer case.
Lists spare parts for chassis, suspension, body mounts, and links.
Lists spare parts for shocks, bumpers, and beadlock wheels.
Lists spare parts for transmission, transfer case, and portal axles.
Lists spare parts for drive shafts, bearings, and specialized hardware.
Lists various types of machine screws, countersunk screws, and pins.
Includes lock nuts, king pin bushings, and other specialized hardware.
Lists spare parts for the crawler body and electronic components.
Lists optional parts for motor mounts, panhard mounts, and diff covers.
Exploded view detailing components of the front axle, shock, and linkage assemblies.
Exploded view detailing components of the rear axle, shock, and linkage assemblies.
Exploded view of the motor, transfer case, and associated gear assemblies.
Exploded view of the chassis frame rails and shock mounts.
Exploded view showing battery tray and front body mount installation.
Steps for installing the motor and servo assemblies onto the chassis.
Steps for installing the transfer case onto the chassis.
Exploded view showing front and rear suspension mount attachments.
Exploded view showing front and rear axle attachment to the chassis.
Exploded view showing differential housing and driveshaft attachment points.
Exploded view of wheel, tire, beadlock rings, and beadlock wheels.
Steps for installing the assembled wheels onto the vehicle's axles.
Steps for attaching the crawler body to the vehicle chassis.
Links to the official Redcat Racing website and social media channels.
Provides links to the full length manual and electric vehicles manual.
To Next Page
