TUBE
AMPLIFIER
Speaker
output
AMP CENTRAL LOGIC SCHEME
REACTIVE/
RESISTIVE
LOAD
THRU OUTPUT
(to connect a
guitar cabinet)
1 2
1
When a guitar cabinet is connected to THRU output, internal load is automatically bypassed.
2
When a guitar cabinet is used, you need to match amp’s output impedance with cabinet ‘s impedance.
3
Loop FX is placed after IR loader, you will not hear any fx patched here into your guitar cabinet.
LINE OUT
&
Line out level
IR
LOADER
USB
LOOP
FX
3
SEND RETURN
XLR &
1/4’’ JACK OUTPUTS
NOTE: A.C. internal load is rated at 8 ohm/100W
RedSeven Amplication - July 2022
To Next Page
Loading...
