FIRST USAGE
We think it’s better to start slow and to understand the workings of the Amp Central before diving
in and trying the unit.
What you need to know to proceed in the safest way, is to consider the Amp Central as a normal guitar
cabinet.
AMP CENTRAL HAS AN INTERNAL LOAD
RATED UP TO 100W @ 8 OHM.
USE THE 8 ohm tap OUTPUT OF YOUR
AMPLIFIER TO CONNECT IT TO AMP
CENTRAL.
Hit standby switch of your amplifier ONLY AFTER PLUGGING A CABLE FROM THE OUTPUT
OF YOUR AMPLIFIER TO “FROM AMP OUT” of Amp Central.
!!!! Do not attempt to connect your amplifier to Amp Central in other "fancy" ways, your amp’s life is
important! We are not responsible for any improper usage that could potentially lead to damage !!!!
To Next Page
Loading...
