Reebok Competitor Rt 6.0 Treadmill - Page 10

10
4
83
31
7
7
C
6
6. Set the Console Base (83) face down on a soft
surface to avoid scratching the Console Base.
Remove the two screws (C) from the Pulse
Crossbar (31). Remove the Pulse Crossbar and
discard the screws.
Remove the four 5/16" x 5/8" Screws (7) from
the Console Frame (87). The Screws will be
used in a later step.
87
83
93
92
87
9
9
7
7. Identify the Left and Right Trays (92, 93).
Attach the Left and Right Trays (92, 93) to the
Console Base (83) with eight #8 x 1/2" Screws
(9). Tip: It may be easier to start the two
inside Screws and then slide the Trays into
place before starting the other six Screws.
Note: It may be necessary to rotate the Console
Frame (87) upward when attaching the Trays
(92, 93).
9
9
9