Reed Instruments R6200 - Battery Replacement Procedure; Product Applications; Accessories and Replacement Parts

12
Battery Replacement
When the low battery symbol "bAt" appears on the display, the batteries
need to be replaced.
1. Open the battery cover by sliding the cover off.
2. Replace the 4 x AAA batteries and secure the battery cover.
Note: If the unit will not be used for a long period of time, remove the
batteries to avoid battery leakage and corrosion of the battery contacts.
Applications
• Sports(leisure,organized,andprofessional)
• Monitorseasonalconditionstoensuresafeenvironmentatschool
or daycare
• Ensuringsafeworkenvironments
Accessories and Replacement Parts
• R9933HumidityCalibrationStandard,33%
• R9975HumidityCalibrationStandard,75%
• R9980HumidityCalibrationKitStandard,33%and75%
• R1500 Tripod
• R9450-ADP International AC Adaptor
• CA-05A Soft Carrying Case
Don't see your part listed here? For a complete list of all accessories and
replacement parts visit your product page on www.reedinstruments.com.
1.888.610.7664 info@REED-Direct.com
REED-Direct.com