REED R6001 User Manual

6
www.REEDINSTRUMENTS.com
MAX/MIN Function
1. Press the MAX/MINbuttontoaccessMaximumandMinimummodes.
2. When pressing the MAX/MINbuttononce,theMAXIndicatorwill
appearonthedisplay.Themaximumtemperatureandmaximum
humidity values are displayed and will automatically update when
newmaximumdatavaluesaremeasured.
3. Press the MAX/MINbuttonagainandtheMINindicatorappearson
the display. The minimum temperature and minimum humidity values
are displayed and will automatically update when new minimum data
values are measured.
4. Press the MAX/MINbuttonathirdtimeandboththeMAXandMIN
indicatorswillblinkcontinuously.TheMaximum&Minimumvalues
willautomaticallyupdateintheMax/Minmemorywhilethecurrent
temperature and humidity measurements are displayed. To view
theMax/MinmeasurementsduringthismodepresstheMAX/MIN
button at any time to toggle through stored measurements.
5. ToexitMAX/MINmodeandresumenormaloperation,pressandhold
the MAX/MIN button for two seconds.
Note:WheninMAX/MINmode,theRELand°C/°Fbuttonsaredisabled.
Auto Power Off
To preserve battery life, the meter is programmed to turn itself off after
30 minutes of inactivity. To disable this feature, press and hold the HOLD
button while powering on the meter. When the meter turns on, release both
buttons simultaneously. The Auto Power Off indicator will not appear on
the display, conrming this feature is now disabled. If the meter is turned
offthenbackon,the"AutoPowerOff"featurewillbeenabledagain.
Humidity Calibration Procedure
In order to calibrate the meter humidity calibration standards are required
(REEDR9933,R9975orR9980).Ifthemeterhasbeenexposedto
extremeconditionsorithasnotbeenusedinalongperiodoftimethe
meter should be calibrated by following steps 1 through 6 below.
1. Turn the meter off.
2.
PresstheHOLD,°C/°F,andpowerbuttonssimultaneouslyandrelease.
continued...
1.800.561.8187 info@REED-Direct.ca
REED-Direct.ca

REED R6001 Specifications

General

Brand	REED
Model	R6001
Category	Measuring Instruments
Language	English