EasyManua.ls Logo

Reely Carbon Fighter - User Manual

Reely Carbon Fighter
124 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Best.-Nr: 23 66 00: Carbon Fighter
Best.-Nr: 23 66 06: Carbon Fighter 4WD
Best.-Nr: 23 66 66: Carbon Fighter Pro
Best.-Nr: 23 69 99: Carbon Fighter Pro ARR
Best.-Nr: 23 77 00: Carbon Breaker Pro
Best.-Nr: 23 80 00: Carbon Rallye
Best.-Nr: 23 88 00: Carbon Racer
Sehr geehrte Kundin, sehr geehrter Kunde,
Defekte bei Servos werden u.a. durch schwergängige Anlenkungen bzw. Mechani-
ken (z.B. durch Verschmutzung oder Rost) genauso wie durch unsymmetrische und
damit nicht lineare geometrische Lenkeinstellungen verursacht.
Deshalb müssen Sie vor dem erneuten Fahrbetrieb bei Ihrem Modell nachfolgende
Punkte überprüfen und eventuell entsprechende Korrekturen durchführen.
Durch diese Maßnahmen gewährleisten Sie eine stärkere, unter Last schnellere und
vor allem nach links und rechts gleichmäßige Ansteuerung der Lenkung.
1. Kontrolle der Lenkgeometrie
Die beiden rechtwinkligen Lenkhebel („A“ und „A´“) müssen exakt parallel und somit
90° zur Linie „B“ ausgerichtet werden. Die Linie „B“ ist genau 90° (also quer) zur
Fahrrichtung.
Sollten die vorderen Räder nach der Korrektur der Lenkhebelposition nicht exakt auf
neutral (gerade) stehen, so müssen Sie mit den Spurstangen „C“ die Neutral-
Einstellung der Räder (Spur) einstellen.
Der Servoabtriebshebel „D“ des Lenkservos muss bei Neutralstellung der Lenkung
am Senders (Trimmung ebenfalls auf „0“ einstellen) exakt 90° zum Servogehäuse
ausgerichtet sein.
Wenn notwendig, so demontieren Sie den Servoabtriebshebel „D“ und setzen ihn
versetzt wieder auf. Geringfügige Abweichungen können mit der Trimmung am
Sender eingestellt werden.
Sind die Lenkhebel und der Servoabtriebshebel wie oben beschrieben exakt
eingestellt, muss eventuell noch die Steuerstange „E“ verstellt werden, damit die
Räder wieder auf Geradeausfahrt stehen.

Wichtige Informationen Version 06/10
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie,
Mikroverfilmung, oder die Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der
schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung. Änderung in Technik
und Ausstattung vorbehalten.
© Copyright 2010 by Conrad Electronic SE. 01_0610_01
2. Montage der Steuerstange am Servoabtriebshebel
Entfernen Sie die Schraube „A“ vom Kugelkopfanschluss „B“ und schrauben den
Kugelkopfanschluss an den Servoabtriebshebel in dem zweiten Loch von Innen
(Position „C“) wieder an.
Bevor Sie das Anlenkgestänge wieder montieren, müssen Sie noch die Leichtgän-
gigkeit der Anlenkung prüfen und, wenn notwendig, durch Reinigung/Schmierung
wieder herstellen.
Nach den Korrekturen müssen Sie am Sender noch den Servoweg für die Lenkung
anpassen. Hinweise finden Sie hierzu in der Bedienungsanleitung zur Fernsteue-
rung.
Achten Sie bei den Einstellungen auf jeden Fall darauf, dass das Servo nicht auf
Block läuft!
Mit freundlichen Grüßen,
Ihr REELY-Team

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Reely Carbon Fighter and is the answer not in the manual?

Summary

1. Introduction

2. Intended Use

3. Explanation of Symbols

4. Safety Notices

General Safety Information

Provides essential safety advice and precautions for product use.

Engine and Fuel Safety

Covers critical safety guidelines for engine operation and fuel handling.

Driving and RC Safety

Safety recommendations for driving the model and using the RC system.

Battery and Power Safety

Safety instructions for handling batteries and power components.

5. Terminology

6. Preparations

Scope and Accessories

Details package contents, required/recommended accessories, and tools.

Commissioning Checks

Checklist for commissioning and setting up the RC system.

Failsafe Module Setup

RC System Range Test

Servo Function Check

Basic Carburettor Setting

I) Starting the Engine

Engine Operation Basics

Covers general information, starting cold/warm engines, and shutdown procedures.

Engine Run-in Instructions

Details the critical run-in process to ensure engine longevity and performance.

7. Driving

General Driving Information

Provides advice on optimal driving practices and model handling.

Component Effects of Driving Style

Explains how driving behavior impacts various vehicle components.

8. Setup

Engine Fine Tuning

Instructions for optimizing engine performance through mixture and idle adjustments.

Shock Absorber Adjustment

Guidance on adjusting shock absorbers for optimal suspension performance.

Camber Setting

Instructions for adjusting wheel camber for improved handling.

Wheel Alignment and Advanced Tuning

Details on setting wheel alignment and performing advanced tuning.

9. Cleaning and Maintenance

Pre-Use Checks and Cleaning

Covers essential checks before use and general cleaning procedures.

Brake and Lubrication Details

Information on brake wear and proper lubrication of moving parts.

Fuel System and Engine Maintenance

Maintenance guidelines for the fuel system and engine components.

Plug and Air Filter Care

Instructions for maintaining the spark plug and air filter for optimal function.

Environmental Driving Conditions

Notes on operating the model in adverse weather or environmental conditions.

10. Disposal

Product and Battery Disposal

Guidelines for environmentally responsible disposal of the product and batteries.

11. Declaration of Conformity (DOC)

12. Technical Data

Engine and Chassis Specifications

Detailed specifications for the engine, power transmission, and chassis.

Undercarriage and Dimensions

Technical details on the undercarriage, suspension, and overall dimensions/weight.

13. Troubleshooting

RC System Issues

Solutions for common problems related to the radio control system.

Engine and Fuel System Problems

Troubleshooting steps for engine and fuel system malfunctions.

Chassis Problems

Troubleshooting common issues related to the vehicle chassis and drive train.

Summary

1. Introduction

2. Intended Use

3. Explanation of Symbols

4. Safety Notices

General Safety Information

Provides essential safety advice and precautions for product use.

Engine and Fuel Safety

Covers critical safety guidelines for engine operation and fuel handling.

Driving and RC Safety

Safety recommendations for driving the model and using the RC system.

Battery and Power Safety

Safety instructions for handling batteries and power components.

5. Terminology

6. Preparations

Scope and Accessories

Details package contents, required/recommended accessories, and tools.

Commissioning Checks

Checklist for commissioning and setting up the RC system.

Failsafe Module Setup

RC System Range Test

Servo Function Check

Basic Carburettor Setting

I) Starting the Engine

Engine Operation Basics

Covers general information, starting cold/warm engines, and shutdown procedures.

Engine Run-in Instructions

Details the critical run-in process to ensure engine longevity and performance.

7. Driving

General Driving Information

Provides advice on optimal driving practices and model handling.

Component Effects of Driving Style

Explains how driving behavior impacts various vehicle components.

8. Setup

Engine Fine Tuning

Instructions for optimizing engine performance through mixture and idle adjustments.

Shock Absorber Adjustment

Guidance on adjusting shock absorbers for optimal suspension performance.

Camber Setting

Instructions for adjusting wheel camber for improved handling.

Wheel Alignment and Advanced Tuning

Details on setting wheel alignment and performing advanced tuning.

9. Cleaning and Maintenance

Pre-Use Checks and Cleaning

Covers essential checks before use and general cleaning procedures.

Brake and Lubrication Details

Information on brake wear and proper lubrication of moving parts.

Fuel System and Engine Maintenance

Maintenance guidelines for the fuel system and engine components.

Plug and Air Filter Care

Instructions for maintaining the spark plug and air filter for optimal function.

Environmental Driving Conditions

Notes on operating the model in adverse weather or environmental conditions.

10. Disposal

Product and Battery Disposal

Guidelines for environmentally responsible disposal of the product and batteries.

11. Declaration of Conformity (DOC)

12. Technical Data

Engine and Chassis Specifications

Detailed specifications for the engine, power transmission, and chassis.

Undercarriage and Dimensions

Technical details on the undercarriage, suspension, and overall dimensions/weight.

13. Troubleshooting

RC System Issues

Solutions for common problems related to the radio control system.

Engine and Fuel System Problems

Troubleshooting steps for engine and fuel system malfunctions.

Chassis Problems

Troubleshooting common issues related to the vehicle chassis and drive train.

Reely Carbon Fighter Specifications

General IconGeneral
BrandReely
ModelCarbon Fighter
CategoryMotorized Toy Car
LanguageEnglish

Related product manuals