REER S.p.A. - 32 via Carcano - 10153 Torino Italia Internet: www.reer.it - e-mail: info@reer.it
6
8541150 - rev.1 - 10/07/2017
Introduction
GLOSSARY
PROTECTED HEIGHT A measure that indicates the height controlled by the curtain.
SAFETY DISTANCE
Minimum distance that must exist between the protected gate and the
dangerous area
EDM
External Device Monitoring: control of external contactors switching through
the feedback input.
MUTING
Function of temporary suspension of the safety function: temporary exclusion
of the safety curtain, automatically and safely carried out based on the
machine cycle.
OVERRIDE
Forced activation of OSSD outputs: during the muting cycle for material
removal
RANGE Maximum operating distance: between emitter and receiver
RESOLUTION
Minimum detectable object size: to ensure the arrest of the dangerous
machine
START/RESTART
INTERLOCK
Interlock function (manual reset required): when starting or restarting the
machine
RESPONSE TIME Time: between interruption of the gate and disabling of outputs
LX Muting Logic with 2 mono-directional cross-sensors
L2 Muting Logic with 2 mono-directional parallel sensors
TX Muting Logic with 2 bi-directional cross-sensors
T4 Muting Logic with 4 bi-directional parallel sensors
S Model without Muting
SM Model with Muting and Hardware conguration on main connector
SMO SM model with integrated Muting lamp
SMP Model with Muting Programmable with SCS software
SMPO SMP model with integrated Muting lamp
DISPOSAL OF MATERIALS
Learn the regulations for collecting electrical and electronic products in force in the country where you want
to dispose of your product.
Observe local regulations for waste disposal and do not throw away old products with normal domestic
waste.
A proper disposal of non-usable products prevents potential negative consequences for the environment
and the population.
To Next Page
Loading...
Need help?
General
