The alarm value can only be entered as a positive value,
but it counts in positive and negative direction.
If the unit is changed, the programmed value must be
reset.
To activate or deactivate a programmed alarm, press and hold
for 3 seconds.
In the Alarm mode, the acoustic sound can be deactivated and
only a visual message is triggered on the display..
1. press ; to enter the menu
2. press , navigate to alarm
3. press , confirm
4. press , navigate to (sound deactivated)
5. press , confirm «sound deactivated»
The following symbol appears on the display, when the alarm
is triggered:
To reactivate the audible alarm/tone:
1. press , to enter the menu
2. press , navigate to alarm
3. press , confirm
4. press , navigate to (sound activated)
5. press , confirm «sound activated»
To Next Page
Loading...
