Reflex Marine WAVE4 - Data Plates

To Next Page

To Previous Page

Rev 1.0

4.4 Data Plates

Inspection Data Plate

An inspection data plate will be issued and attached by the inspector, which should show:

i. Tare Weight (kg)

ii. Pay load / SWL (kg)

iii. Maximum gross load (kg)

iv. The load test date (DD/MMM/YYYY)

v. Test load (kg)

vi. Serial number: WV4-XXX (where XXX is unit I.D. No)

vii. Model number: WAVE-4

Marker Plate

Every unit comes with a marker plate, which includes the following information:

i. Model number: WAVE-4

ii. Serial number: WV4-XXX (where XXX is unit I.D. No)

iii. Date of manufacture (DD/MM/YYYY)

iv. Tare weight (kg)

v. Pay load / SWL (kg)

vi. Maximum gross load (kg)

vii. Maximum number of passengers (standard & stretcher mode)

viii. Entry into service date (DD/MMM/YYYY)