Reflex Marine WAVE4 - Inspection Tool List

Rev 1.0
29
4.9 Inspection Tool List
To complete some of the inspection and maintenance requirements for WAVE the following tools may be
required:
Required Tools
Optional Tools
1x 36mm Spanner / Wrench
1x 32mm Spanner / Wrench
2x 19mm Spanners / Wrench
2x 17mm Spanners / Wrench
2x 10mm Spanners / Wrench
1x 19mm Socket
1x 17mm Socket
2x 13mm Sockets with 6” extensions
1x Socket Wrench
1x Torque Wrench (for 60Nm and 45Nm)
1x Pliers
1x 6 mm Allen Key
1x Slow Release Ratchet Straps
Parts tray
Ladder/Platform
Hammer/ Mallet
Copper grease
Forklift/Overhead Crane
Inspection stands - Secure stands to
elevate the unit for access to underside