INSTALLATION
Ensure the operating voltage of the Osiris (stated on the base) is the same as that of
your local power supply.
The Osiris amplifier will work well on most surfaces, a high quality equipment stand which
provides plenty of space for air flow to prevent overheating is recommended. If using a
phono stage and turntable you can avoid magnetic interference by positioning the
amplifier as far away from the turntable as the interconnect will allow. If possible, place it
to the side of the turntable. Keep other equipment, such as tuners or CD players away
from the amplifier. Due to the layout of Rega’s amplifier circuit designs, they are virtually
insusceptible to electro magnetic interference, and by virtue of the custom aluminium
case, emit practically no electro magnetic radiation. However, placing any electronic
equipment close together may impair the performance of one or both items. Never stack
other hi-fi components on top of the Osiris amplifier.
WARNING: The OSIRIS weighs 25.6kg, please ensure the shelf or stand you are
using can safely support this weight. Please refer to your stand manufacturers
manual for maximum load capacity.
Mains lead (supplied)
A Rega designed fully shielded, high quality, high current capacity mains lead is included.
5
To Next Page
Loading...
Need help?
General
