The handling of CD’s
To keep the CD clean, handle by its edge only. Do not touch the
surface; natural oils from skin can stop the laser from reading the disc
accurately.
Do not expose the disc to bright sunlight, or leave near hot places
such as electrical equipment or in a parked car. Excess heat can
cause the disc to warp.
Do not use any cleaning fluids or anti-static sprays on the disc, they
can damage the disc and the player.
Store the disc in its case when not in use to prevent it from becoming
scratched
.
17 18
Creating a Program (continued)
3) If you make a mistake, pressing CLEAR will erase the last track
you entered. Keep pressing CLEAR to erase more than one track
from the play list. Hold down CLEAR for 3 seconds if you want to
delete the whole program list. To continue programming, enter the
tracks you want from where you left off.
4) Press PLAY on the remote. Your selected tracks will now play.
5) Pressing PROGRAM again will display “CONTINUE” and you will
be back to normal play mode. Pressing PROGRAM once more will
return the programmed tracks.
6) To create a new program list, press STOP. Clear the previous
program list, then to re-program, repeat from step 2.
To Next Page
Loading...
Need help?
Laser Specifications
Power
Weight and Dimensions
