Chapter 3
1-70
Outboard Engine Checks
A select portion of checks from engine break-in to periodic
maintenance are covered in the following pages. Since advanced
ignition and fuel injection systems are used on outboard engines
along with special factory training and tools it is best to contact your
Regal dealer for more of the detailed procedures. Always refer to your
engine manual for detailed information and technical speci cations.
AVOID ENGINE DAMAGE!
FOLLOW ALL ENGINE BREAK-IN PROCEDURES AS
RECOMMENDED BY THE ENGINE MANUFACTURER.
FAILURE TO FOLLOW THE BREAK-IN-PROCEDURE MAY
VOID THE OUTBOARD ENGINE WARRANTY!
AVOID ENGINE DAMAGE!
DO NOT RUN ENGINE AT A CONSTANT RPM
FOR PROLONGED PERIODS OF TIME
DURING BREAK-IN PERIOD.
CHECK ENGINE OIL OFTEN.
AVOID ENGINE DAMAGE!
DO NOT RUN ENGINE OUT OF WATER UNLESS YOU
USE A FLUSHETTE APPROVED BY THE OUTBOARD ENGINE
MANUFACTURER.
FOLLOW MANUFACTURER’S ATTACHING AND
RUNNING INSTRUCTIONS.
To Next Page
Loading...
