Chapter 7
Check the helm control box and the
cable attachment at the engine for
tightness and shi ing without binding.
Shi and throttle controls at both the
engine and helm areas must be checked
on a periodic basis. At the engine end,
make sure all control cable hardware
is tight and control cable brackets are
secure. An application of silicone spray
on the cable ends periodically will keep
control cables working freely and ghts
corrosion. At the helm end check to
make sure the control box hardware is tightly secured. Contact a
marine professional or Regal dealer for further assistance.
REMOTE CONTROL
To Next Page
Loading...
