1 Introduction
The VGreen
®
165 is a premium e ciency variable speed motor that
provides tremendous program exibility in terms of motor speed
and time settings. The variable speed VGreen 165 is intended to
enable running at the lowest speeds needed to maintain a sanitary
environment, which in turn minimizes energy consumption. Pool size,
the presence of additional water features, chemicals used to maintain
sanitary conditions, and environmental factors will impact optimal
programming necessary to maximize energy conservation.
The integrated electronics interface controls the speed settings as
well as the run durations. The VGreen 165 can run at speeds ranging
between 600 and 3450 RPM and is rated for 208-230 Vrms at an input
frequency of 60 Hz.
2 Navigation Overview
+, - Increases/decreases selected value
Pressing any key following a change accepts the current value
displayed inside the setting
Figure 1: VGreen 165 User Interface Button Descriptions
3
Programming Buttons (4x)
Power LED
Fault LED
Stop Button
Start Button
Active Step LEDs (4x)
Speed LED
Duration LED
Bar Graph
+/- Buttons
The VGreen 165 is for use with 208-230 Vrms nominal, and in pool pump applications
ONLY. Connection to the wrong voltage, or use in other application may cause damage
to equipment or personal injury.
10019878-001-001 _V-Green165 UM_7-30-19.indd 5 8/5/2019 4:26:55 PM
To Next Page
Loading...
