Regin Regio Midi User Manual

Regio Midi manual Chapter 2 Introduction to Regio 7
Regio Midi
Communication The controllers can be connected to a central SCADA-system via RS485 (EXOline, BACnet*
or Modbus) and configured for a particular application using the configuration tool Regio
tool
©
, which can be downloaded free of charge from Regin’s homepage
www.regincontrols.com. See the manual for Regio tool
©
for more information.
*
BACnet is only available in models with display
Control modes The controllers can be configured for different control modes/control sequences:
• Heating
• Heating or cooling via the change-over function
• Heating/Heating
• Heating/Cooling
• Heating/ Cooling with VAV-control and forced supply air function
• Heating/Cooling with VAV-control
• Cooling
• Cooling/Cooling
• Heating/Cooling/VAV (only available in …3-models, except C3DFOC)
• Heating/Heating or Cooling via change-over (only available in …F-models)
• Change-over with VAV- function
Application examples

Regin Regio Midi Specifications

General

Brand	Regin
Model	Regio Midi
Category	Controller
Language	English