Manual CORRIGO L10 2002-11
CORRIGO L10 for use with air handling systems comes with or without LON
communication option.
L10 Temperature controller for up to three sequences
L10-LON Same as L10 bus also has LON Works communication.
Introduction
COORIGO L10 is a new controller which has been designed to be easy to use and
operate. It has been designed for use in less complex air-handling systems. The
controller has a display and built in indicator on the front for alarm and is operated
by means of clearly defined buttons.
The controller has been designed for mounting on a DIN rail, in norm housing or on
the front of a cabinet.
The required functions are selected with the help of questions in normal script or by
means of a code under the configuration menu depending on the type of application.
The controller has a year-base clock and automatic summer/winter time changeover.
The menu system works with different user-levels to show settings and to allow
settings to be altered. This means that non-technical staff can feel secure while
using the system since it is impossible, on the lower user-levels, to programme
incorrect settings when checking operating status, parameter values, alarms etc.
During normal operation, without pressing any buttons, the display also shows the
most important operating statuses such as setpoint/current value, sequence-output
control and time/date/version etc.
We hope you will be satisfied with your CORRIGO and that it will provide you with
simpler and more economic running of your control systems.
Models
Contents
Page 4 Technical data
5 Overview of in- and outputs
6 Installation and wiring
10 Handling and menu system
14 Configuration of functions
22 Description of inputs/outputs
24 Scheduler
25 Settings
27 Overview of alarm functions
28 Commissioning protocol
30 Configuration guide
31 Index
To Next Page
Need help?
General
