8 Chapter 3 Models Regio Midi manual
Chapter 3 Models
There are 12 different Midi room controllers. They can be divided according to type of control
in basic models, models for fan control and models for three-point control.
Model overview
RC… Basic models control analogue actuators, thermal actuators or On/Off actuators with spring
return.
RCC… Basic models with built-in CO
2
sensor. The units control analogue actuators, thermal actuators
or On/Off actuators with spring return.
…-C-models Models with communication. Communication via EXOline, Modbus or BACnet. Note that
BACnet communication only is available for models with display.
…D-models Models with display.
…F-models Like basic models, models for fan control (…F-models) control analogue, thermal and spring
return actuators. With the exception of RC-C3DFOC, they also have a button/fan switch and
three digital outputs for control of a three-speed fan (fan coil, etc.). RC-C3DFOC has EC fan
control on analogue output UO3.
…H-models Models with hidden setpoint
…O-models Models with occupancy button
…T-models Models for three-point control (…T-models) have four digital outputs for control of two three-
point actuators.
…C-models C at the end. Models with input for external CO
2
sensor.
…3-models The …3-models have an additional output for control of either an On/Off damper, analogue
forced ventilation damper, an analogue EC-fan or an analogue third damper.