REI ST-1000 User Manual

8
SPECIFICATIONS
AUDIO SECTION
Power supply voltage (negative ground) ……………….………….12V DC (10V-18V)
Standby Current…...………………………..…………..…………………………25mA
Max Current Consumption……….……………………….……….….………. …..7.5A
Speaker impedance …………………….……………….……… 4-8 Ohms per channel
POWER OUTPUT
Continuous Output into 4, 20 to 20,000 Hz at 10 % THD …..…...………2 x 20Watts
Maximum Power Output (Volume control Maximum)……….…...…50W×2 (at 1kHz)
FM TUNER
Range ……………………………………………………..….(USA) 87.5 – 107.9 MHz
(EUR) 87.50 – 108.00 MHz
Usable Sensitivity (S/N = 30dB)……………………………...7.34dBf.(0.6uV/75ohms)
Signal to noise ratio ………………………………….…………………...58dB (Mono)
Stereo separation (@ 1K Hz) ………………………….………...……….……..…42dB
AM TUNER
Range …………………………………………………..…….…(USA)530 – 1,710 kHz
(EUR) 522 – 1,620 kHz
Usable Sensitivity (S/N = 20dB)………………………..…………....23dBuV (14.4uV)
Signal to noise ratio (LEVEL60dbuV)…….……………….......………………... 60 dB
WEATHER BAND TUNER
Range …………………………………………………..……….162.400 –162.550MHz
Usable Sensitivity (S/N = 20dB)……………………..…………………0.7uV(-9dBuV)
Signal to noise ratio (LEVEL40dbuV)…….…………………...………………….42dB
AUXILIARY INPUT SPECIFICATIONS
Input Voltage Maximum Voltage…………………………………………………...2.0V
Input impedance…………………………………………………………………..10K
DIMENSIONS
Chassis (W x H x D) …………………………………....………….. 178 x 50 x 72 mm
Nosepiece (W x H x D) ……………………………….….…………. 188 x 58 x 13mm
Weight ………………………………………………….…………………….…. 15.8oz
*Due to continuous product improvement, specifications and design are subject to
change without notice.
Radio Engineering Industries, Inc.
www.radioeng.com
Rev A Date: 4-17-12
Heavy Duty Compact AM/FM Stereo Weather Band Radio
w/Front-Panel Auxiliary Input
Installation/ Operation Manual
50W x 2 ST-1000

REI ST-1000 Specifications

General

Category	Car Receiver
Built-in Bluetooth	Yes
USB Port	Yes
Auxiliary Input	Yes
AM/FM Tuner	Yes
Remote Control	Yes
Display Type	LCD
Power Output	50 Watts x 4 Channels

Summary

Specifications

Audio Section Specifications

Details power supply voltage, current consumption, and speaker impedance for the audio system.

FM Tuner Specifications

Lists range, usable sensitivity, signal-to-noise ratio, and stereo separation for FM reception.

AM Tuner Specifications

Provides range, usable sensitivity, and signal-to-noise ratio for AM reception.

Weather Band Tuner Specifications

Outlines range, usable sensitivity, and signal-to-noise ratio for weather band reception.

Auxiliary Input Specifications

Details maximum input voltage and input impedance for auxiliary audio sources.

Dimensions

Specifies the physical dimensions and weight of the radio unit.

Installing the Radio

DIN Collar Installation

Instructions on inserting and securing the DIN collar into the dash opening.

Radio Insertion and Connection

Steps for connecting the radio's harness and antenna, and inserting it into the collar.

Radio Removal

Procedure for safely removing the radio from the dash using release keys.

Electrical Connections and Controls

Electrical Connections Diagram

Wiring diagram for connecting the radio to the vehicle's power and speakers.

Controls and Indicators Overview

Identification and function of the radio's front panel buttons and display.

Operation and Troubleshooting

Radio Operation Modes

Guide to using power, volume, tuning, band selection, and auxiliary input functions.

Weather Band Mode Operation

Instructions for selecting weather band channels and NOAA broadcasts.

Troubleshooting Common Issues

Solutions for problems like no power, no sound, or inability to tune stations.