20
5. Press the SHUTTER button again to end the recording. If
the memory is full the video camera will stop recording
automatically.
• On the upper of the LCD monitor displays the recorded time.
• When the light is insufcient press the RIGHT/LED ON/OFF
button to turn on the compensating lamp and when the light is
enough press the RIGHT/LED ON/OFF button again to turn off.
3.4 HOW TO TAKE STILL IMAGES
1. Set the digital video camerar to capture mode, the icon
appears on the LCD screen.
2. Zooming: Press the ZOOM IN or ZOOM OUT buttons to
zoom in or zoom out the screen. The value of magnication
level appears on the LCD monitor.
3. Hold the camcorder steady and then press the SHUTTER
button down to take a picture.
• When the light is insufcient press the RIGHT/LED ON/OFF
button to turn on the compensating lamp and when the light
is enough press the RIGHT/LED ON/OFF button again to turn
off.
To Next Page
Loading...