EasyManuals Logo

Reloop iPhono 2 User Manual

Reloop iPhono 2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
ENGLISH
11
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) condi-
tions. Keep the device away from direct exposure to the sun and heat sources such as radiators, ovens,
etc.(evenduringtransportinaclosedvehicle).Alwaysensuresufcientventilation.
- The device must not be operated after being taken from a cold environment into a warm environment.
The condensation caused hereby may destroy your device. Do not switch on or operate the device until
it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This de-
viceshouldonlybecleanedwithadampcloth.Neverusesolventsorcleaninguidswithapetroleum
base for cleaning.
- When relocating, the device should be transported in its original packaging.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular care
when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the organizati-
on of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be moni-
tored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or problems.
APPLICATION IN ACCORDANCE
WITH REGULATIONS
- This device is a professional interface to digitally transmit analogue signals such as, for example, from
a turntable or a tape deck via USB to a computer. The iPhono 2 is ideal for archiving old vinyl or tapes
onacomputerand/orforburningontoawritablemediumlikeaCD.Thedeviceishookedupbetweena
signal source and a computer.
- This product is authorised for connection to computer USB ports and is designed exclusively for indoor
application.
- If the device is used for any other purposes than those described in the operation manual, damage can
be caused to the product, leading to exclusion of warranty rights. Moreover, any other application that
doesnotcomplywiththespeciedpurposeharboursriskssuchasshortcircuit,re,electricalshock,
etc.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains line or the casing, as well as
for wearout of wear parts such as rotary and sliding switches.
- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected
and secured against accidental use. Always disconnect the mains plug from the outlet!
- Disconnect the USB cable from your computer.
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if
the device no longer functions, following longer storage under unfavourable conditions or after major
transport stress.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reloop iPhono 2 and is the answer not in the manual?

Reloop iPhono 2 Specifications

General IconGeneral
Signal-to-Noise Ratio (SNR)70 dB
Audio quality16 bit
Frequency range20 - 20000 Hz
Line-out Signal-to-Noise Ratio (SNR)75 dB
Line-out Total Harmonic Distortion (THD)0.1 %
Audio (L/R) out2
USB 2.0 ports quantity1
Product colorBlack
USB poweredYes
Weight and Dimensions IconWeight and Dimensions
Weight93 g
Dimensions (WxDxH)130 x 115 x 49 mm