EasyManuals Logo

Reloop iPhono 2 User Manual

Reloop iPhono 2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
ENGLISH
16
NOTE! If a CD player with a very high output is used, the input recording level can exceed 1V rms, this
will result in slight digital noise and distortion. And the LED will turn from green to orange. To nd
the correct signal location rotate the Gain Dial -3- counterclockwise until the LED returns to green.
TECHNICAL INFORMATION
GlobalDistributionGmbHGmbHdidnottestthefollowingmanufacturers’specicationforplausibility
and accuracy:
Inputs: Phono5mV/47kOhm+1/-3dB
Line200mV/10kOhm+1/-2dB
Outputs: MasterNormal0.77V/600Ohm
HeadphonesNormal1.1V/32Ohm
Frequencyrange: 20Hz-20KHz,+/-1dB(RIAA+/-3dB)
Distortion: > 0.1 %
Stereo separation: < 65 dB
S/Nratio: Phono70dB
Line 75 dB
USB: A/D&D/Aconverter16bit
Interface USB 1.1 or USB 2.0 with FullDuplex support
Power supply: 5 V DC
Dimensions: 80x74x33mm
Weight: 0.094kg(withoutmainsadapter)
HAVE FUN WITH YOUR RELOOP!
Reloop-SolutionforDJs
Global Distribution GmbH
Schuckertstraße 28
48153Muenster
Germany
Fax+49.251.6099368
www.reloop.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reloop iPhono 2 and is the answer not in the manual?

Reloop iPhono 2 Specifications

General IconGeneral
Signal-to-Noise Ratio (SNR)70 dB
Audio quality16 bit
Frequency range20 - 20000 Hz
Line-out Signal-to-Noise Ratio (SNR)75 dB
Line-out Total Harmonic Distortion (THD)0.1 %
Audio (L/R) out2
USB 2.0 ports quantity1
Product colorBlack
USB poweredYes
Weight and Dimensions IconWeight and Dimensions
Weight93 g
Dimensions (WxDxH)130 x 115 x 49 mm