Reloop RMP-3 - Page 11

ENGLISH
37
NOTE:
As soon as the Time or Ratio Buttons are activated, the Scratch mode is temporarily deactivated.
TIP:
To create a great lter sweep effect, set the Time Parameter value to „0“ mSec. and activate
„Hold“. Use the Parameter Ratio Button and the Jog Wheel to innitely lter the frequency of
your track from the value „0“ (High Pass Filter) to the value of „255“ (Low Pass Filter).
30.Phase Button
UsethePhaseButton-30-toactivatethephaseeffect.Althoughsimilartoaanger,itemphasises
the upper pitch less and sounds slightly more harmonious.
Your device synchronises the effects automatically with the current BPM. Use the Beat link Buttons
-36-tomodifythefrequencytomatchthebeat.Tomanuallychangethebeatfrequencyoftheef-
fect,presstheParameterTimeButton-25-andregulatethefrequencyvalueusingtheJogWheel
(von0-9990mSec.).Toinuencetheintensityoftheeffect,presstheParameterRatioButton-26-
andsetthevolumewiththeJogWheel(from0–255).
NOTE:
As soon as the Time or Ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
31. Hold Button
WhenactivatingtheHoldfunctionwiththebutton-31-yourplayermaintainstheseteffectfrequen-
cy.Otherwise,theeffectvaluealwaysreturnstotheoriginalvalue.
ATTENTION:
The original value can be independently dened. For this, activate the Hold function -31- and set
the desired valued. When deactivating the Hold function and changing the Frequency/Intensity
value, the value will automatically jump to the dened original value.
32.Echo Button
UsetheEchoButton-32-toactivateaReverb/Delayeffect.Yourdevicesynchronisestheeffects
automaticallywiththecurrentBPMvalue.UsingtheBeatLinkButtons-36-,youcanpreciselyset
the frequency to match the beat.
Tomanuallychangethebeatfrequencyoftheeffect,presstheParameterTimeButton-25-and
regulatethefrequencyvalueusingtheJogWheel(from0-2000mSec.).Toinuencetheintensity
oftheeffect,presstheParameterRatioButton-26-andsetthevolumeusingtheJogWheel(from
0–255).
NOTE:
As soon as the Time or Ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
TIP:
The Echo effect sounds best if synchronous with the beat. Ideally, use the Beat Link Buttons -36-
to vary the length of the effect.
33. Flanger Button
UsetheFlangerButton-33-toactivatetheangereffect.Thisfrequentlyappliedeffectissimilarto
the Phase effect, but slightly more harmonious, emphasises the upper pitch more and is reminiscent
ofayingaircraft.YourdevicesynchronisestheeffectsautomaticallywiththecurrentBPMvalue.
UsetheBeatLinkButtons-36-topreciselysetthefrequency.Tomanuallychangethebeatfrequen-
cyoftheeffect,presstheParameterTimeButton-25-andregulatethefrequencyvaluewiththe
JogWheel(from0-9990mSec.).
Toinuencetheintensityoftheeffect,presstheParameterRatioButton-26-andsetthevolume
withtheJogWheel(from0–255).
NOTE:
As soon as the Time or Ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
TIP:
The Flanger effect is best when set to 4/1 beat with the Beat Link Button.
IM_RMP3_GB.indd 37 03.11.2009 09:18:37