Reloop RMP-3 - Page 21

ENGLISH
47
Name:
ViatheNamefunctionitispossibletodeterminetheplayer‘shardwareID.Thechosennamewillbe
recognized by the computer.
The following names are selectable:
RMP-3
RMP-3B
RMP-3C
RMP-3D
RMP-3F
RMP-3G
RMP-3H
This is suggestive if you would like to connect several RMP-3 players on one computer. This way each
playerwillbedisplayedwithanindividualhardwareID.Pleasealsorefertothechapter„Connecting
severalRMP-3players“.
I/O (Input/Output)
You can determine whether the MIDI parameters should be displayed. To do so hold the Shift Button
-46-andturntheTrackWheel-4-inordertoswitchbetween„Display“and„Hide“.
D. MIDI CC Type
In the MIDI CC Type menu you can assign individual control & change parameters to the Track enco-
der-4-,thePitchfader-22-andtheJogWheel-18-.
InordertochangetheCCTypeholdtheShiftButton-46-andturntheTrackWheel-4-untilyou
reach the desired position.
• Track (Tracks Encoder)
The following is possible:
Relative
Absolute
Note
• Jog (Jog Wheel)
The following is possible:
Relative
Note
• Jog X (Jog Wheel with activated X parameters)
The following is possible:
Relative
Note
• Jog Y (Jog Wheel with activated Y parameters)
The following is possible:
Relative
Note
E. MIDI Channel
In this option you can determine on which two MIDI channels the RMP-3 should send.
The following is possible:
Channel1-4
Channel5-8
Channel9-12
Channel13-16
Thisway,whenusingseveralRMP-3players,upto4devicescansendondifferentMIDIchannels.
Pleasealsorefertothechapter„ConnectingSeveralRMPPlayers“.
IM_RMP3_GB.indd 47 03.11.2009 09:18:39