REMEHA 35c User Manual

User Guide
Remeha Avanta Range
24c | 28c | 35c | 39c | 18s | 24s | 30s
Please ensure that the installer has fully completed the Benchmark Checklist on the inside
back pages of the installation instructions supplied with the product and that you have signed
it to say that you have received a full and clear explanation of its operation. The installer is
legally required to complete a commissioning checklist as a means of complying with the
appropriate Building Regulations (England and Wales).
All installations must be notified to Local Area Building Control either directly or through
a Competent Persons Scheme. A Building Regulations Compliance Certificate will then
be issued to the customer who should, on receipt, write the Notification Number on the
Benchmark Checklist.
This product should be serviced regularly to optimise its safety, efficiency and performance.
The service engineer should complete the relevant Service Record on the Benchmark
Checklist after each service.
The Benchmark Checklist may be required in the event of any warranty work and as
supporting documentation relating to home improvements in the optional documents section
of the Home Information Pack.
Broag Ltd.
Remeha House
Molly Millars Lane
RG41 2QP WOKINGHAM,
Berks.
Tel: +44 118 9783434
Fax: +44 118 9786977
Internet: uk.remeha.com
www.avantarange.com
E-mail: boilers@broag-remeha.com
© Copyright
All technical and technological information contained in these
technical instructions, as well as any drawings and technical
descriptions furnished by us remain our property and may not be
multiplied without our prior consent in writing.
120578-160109
1
2
0
2
2
5
0
0
7
5
5
8
77
120578.indd 1120578.indd 1 6-3-2009 14:45:496-3-2009 14:45:49

REMEHA 35c Specifications

General

Mounting	Wall-mounted
DHW Output (kW)	35
Warranty	2 years
Fuel Type	Natural Gas
Boiler Type	Combination boiler

Summary

Remeha Avanta Range User Guide

Benchmark Checklist and Installation Compliance

Ensures installer completion of Benchmark Checklist, notification to building control, and service record completion for warranty and home improvements.

Safety Precautions

Gas Leak Detection

Immediate actions to take if a gas smell is detected, including evacuation and contacting emergency services.

Smoke or Flue Gas Detection

Steps to follow if smoke or flue gases are detected, emphasizing evacuation and contacting the installer.

Boiler Installation Location Requirements

Guidelines for boiler placement, prohibiting flammable materials and ensuring accessibility to the spur unit.

Water and Pipe Temperature Considerations

Information on factory settings and maximum temperatures for tap water and system pipes.

Enabling the Boiler

Boiler Preparation and Startup

Steps for draining the boiler, checking water pressure, and initiating the boiler startup sequence.

Setting Room Thermostat

Instructions for setting the room thermostat to the desired temperature for automatic boiler operation.

Troubleshooting Boiler Issues

User-Resolvable Error Codes

Guidance on common error codes and user actions, such as checking water pressure or restarting the boiler.

Installer-Remedied Error Codes

Instructions for handling error codes requiring professional intervention, noting code and boiler type for the installer.

Boiler Settings Adjustment

P1: Central Heating Flow Temperature

Procedure to adjust the flow temperature for the central heating system.

P2: Domestic Hot Water Temperature

Procedure to adjust the temperature for domestic hot water.

P3: Boiler Regulation Mode

How to change the boiler's operating mode between central heating and domestic hot water.

P4: Eco or Comfort Mode

Setting the boiler to operate in Eco mode, Comfort mode, or regulated by controller.

P6: Display On/Off Setting

Configuration option to set the boiler display to remain on or turn off automatically.

Disabling the Boiler

Boiler Disablement for Frost Protection

Instructions for disabling the boiler during long periods of non-use to prevent freezing, using Eco mode.