9
WARNING: The batteries must be
inserted with the correct polarity.
Exhausted batteries must be
removed from the product and
discarded safely. Do not use
rechargeable (nickel – cadmium)
batteries. Duracell and Energizer
batteries are highly recommended.
10. LOCK FACE INSTALLATION
4.
Align the lock face to the backer
plate, with the lock face slightly
rotated to the left. Turn clockwise
until you feel the lock face click into
place.
3.
Plug the electronic lock cable into the
back of the lock face. The connector
on the cable will only fit into the
connector in the lock face in one way.
Locate the lock face box in the door
organizer pocket. Remove the lock face
from the box located inside the safe.
1.
Step 1
2.
Step 2
Step 3
Locate the 1x9V battery in the intial
entry box. Install into the battery
compartment on the back of the lock
face in the proper orientation. The
touch pad will beep when batteries
are successfully installed.
BACK OF LOCK FACE
FRONT OF LOCK FACE
8
#
1 2 3 4
5
6 7
*
9
0
9V BATTERY
Step 4
To Next Page
Loading...