7
1.
2.
3.
4.
WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE A
PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING
INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR
IS CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS
A SAFETY HAZARD UNTIL THE SAFE IS BOLTED DOWN OR SECURED PROPERLY.
Upon receiving your safe, you may find it attached to a shipping skid. The
skid is secured from the underside of the safe by four bolts. Remove the four
bolts that secure the safe to the skids using a wrench or 3/4” (19mm)
socket.
With a person stabilizing the safe, carefully tilt the safe to the left and pull the
shipping skid on the right side away from the bottom of the safe.
With the shipping skid removed from one side of the safe, carefully lower the
safe to the floor.
Follow the same procedure to remove the remaining shipping skid.
M12 BOLT
M12 NUT
8. SHIPPING SKID REMOVAL
To Next Page
Loading...