10
11. PROGRAMMING YOUR SECURITY CODE
Swipe finger(s) across the keypad to
“wake up” and activate the lockface.
Two random numbers will illuminate
when the lock face wakes up.
Individually press both of the two
numbers, in any order, to allow full
access to the keypad. Insert the
factory preset code of (1-5-9-#). This
will unlock the safe in a DEFAULT
MODE. (DO NOT use this code while
securing items in your safe)
1.
On the inside of the safe door, locate
the brass cap. Unscrew and remove
the cap, giving access to the reset
button. Press the reset button.
You will hear a beep. The yellow (left)
light on the E-lock will illuminate so
that you can enter your new code.
2.
While the yellow (left LED) is
illuminated, enter your new 3 to
8-digit security code followed by [*].
Lock face will beep twice indicating
successful programming.
3.
Step 3
Important: Your safe comes programmed with a factory code of [ 1 5 9 # ]. It is
necessary to re-program your safe with a new security code you have personally
selected to provide maximum household security. Be careful in choosing your new
security code, you’ll want to be sure that you can operate the unit quickly without
making an error.
NEW 3-8 DIGIT SECURITY CODE
8
#
1 2 3 4
5 6 7
*
9
0
8
#
1 2 3 4
5 6 7
*
9
0
Step 1
Step 2
Red Reset Button
Brass Cap
To Next Page
Loading...