Remington RM4000 - SPECIFICATIONS & ASSEMBLY; Product Specs and Assembly Guide

9
SPECIFICATIONS
All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any
time without notice.
Approximate Unit Weight (without the battery). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 - 5.5 lbs. (2.0 - 2.5 kg)
T
rimmer Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bump Head
Nylon Trimming Line Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.080 in. (2.03 mm)
Cutting Path Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 in. (30.5 cm)
Battery Type (Model RM4130) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V, 2.5 Ah Lithium-Ion
Battery Type (Model RM4140) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V, 4.0 Ah Lithium-Ion
B
attery Type (Model RM4150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V, 5.0 Ah Lithium-Ion
Approximate Battery Weight (Model RM4130) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 - 2.4 lbs. (0.9 - 1.1 kg)
Approximate Battery Weight (Model RM4140) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 - 3.4 lbs. (1.3 - 1.5 kg)
Approximate Battery Weight (Model RM4150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 - 3.5 lbs. (1.4 - 1.6 kg)
Optimum Battery Charging Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32° to 104° F (0° to 40° C)
O
ptimum Battery Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64° to 73° F (18° to 23° C)
Optimum Battery In-Use Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32° to 113° F (0° to 45° C)
Battery Charger Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 V 60 Hz AC only
Battery Charger Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 A 40 V DC
Approximate Charging Time (Model RM4130). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 minutes
Approximate Charging Time (Model RM4140). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 minutes
Approximate Charging Time (Model RM4150). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 minutes
Approximate Battery Charger Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25 - 1.75 lbs. (0.6 - 0.8 kg)
ASSEMBLY
INSTALLING THE CUTTING HEAD SHIELD
1. Slide the cutting head shield onto the mount bracket (Fig. 1).
Make sure that the tabs on the cutting head shield are fully
inserted into the slots on the mount bracket (Fig. 1).
2. Insert the screws (x2) into the holes (x2) on the cutting head
shield (Fig. 2). Tighten the screws with a Phillips screwdriver
until the cutting head shield is firmly in place.
WARNING:
To prevent serious personal injury, never
operate the unit without the cutting head shield in place.
Fig. 2
Screw (x2)
Hole (x2)
Fig. 1
Mount Bracket
Cutting Head Shield
WARNING:
To prevent serious personal injury and
damage to the unit, never assemble, disassemble or adjust
the unit while it is running. Always turn the unit off and
remove the battery to prevent the unit from starting
accidentally. Always allow the unit to cool before
assembling, disassembling or making any adjustments.
Tab
Slot