REMKO Easy-Control EC1 - Programming Day 7 (Sunday)

Programming day 7 (Sunday)
Programming Parameter Unit
Press
40 x
Switching time 1 time Minutes
Press
41 x
Switching time 1 time Hours
Press
42 x
Switching time 1 temperature Room target temperature
Press 43 x
Switching time 2 time Minutes
Press
44 x
Switching time 2 time Hours
Press 45 x
Switching time 2 temperature Room target temperature
Press
46 x
Switching time 3 time Minutes
Press 47 x
Switching time 3 time Hours
Press
48 x
Switching time 3 temperature Room target temperature
Press
49 x
Switching time 4 time Minutes
Press 50 x
Switching time 4 time Hours
Press
51 x
Switching time 4 temperature Room target temperature
Press 52 x
Switching time 5 time Minutes
Press
53 x
Switching time 5 time Hours
Press 54 x
Switching time 5 temperature Room target temperature
Press
55 x
Switching time 6 time Minutes
Press
56 x
Switching time 6 time Hours
Press 57 x
Switching time 6 temperature Room target temperature
If the power to the remote control is switched off, the time must be reset.
The parameter settings are retained.
13