Need help?Do you have a question about the REMKO Easy-Control EC1 and is the answer not in the manual?
General| Type | Remote Control |
|---|---|
| Display | LCD |
| Battery Type | 2 x AAA batteries |
| Compatibility | REMKO air conditioning units |
| Functions | Temperature control, Timer |
| Power Supply | Battery-operated |
| Weight | 100 g |
Key safety advice for initial operation and general handling of the unit, including hazard warnings.
Explains symbols and signal words used to highlight safety information and tips for proper operation.
Specifies required qualifications for personnel responsible for commissioning, operation, and maintenance.
Outlines risks associated with non-compliance, including unit failure and personal danger.
Emphasizes adherence to safety notes, regulations, and company policies for safe operation.
Provides guidelines for safe operation, including proper setup, handling of parts, and maintenance.
Details hazard prevention measures and compliance with regulations for installation and maintenance work.
Warns against unauthorized modifications, which can cause malfunctions and void liability.
Defines the correct application of the units and warns against any deviating or additional use.
Explains conditions for warranty claims and the process for returning certificates.
Instructions for checking equipment upon delivery and warnings regarding packaging material.
Guidance on proper disposal of packaging and equipment components for environmental safety.
Presents detailed technical specifications and parameters for the Easy-Control EC1 unit.
Provides visual representations and measurements of the unit's physical dimensions.
Explains the symbols and elements shown on the remote control's touch display.
Details the functions of the various keys on the remote control for settings adjustments.
Step-by-step guide to setting the current time and day of the week on the remote control.
Instructions for programming daily heating and cooling time schedules with temperature settings.
Specific instructions for programming time and temperature settings for weekdays.
Instructions for setting time and temperature programs for Saturday.
Instructions for setting time and temperature programs for Sunday.
Illustrates the arrangement and labeling of terminals on the remote control and I/O module.
To Next Page