REMKO Easy-Control EC1 - Unit Description; Scope of Delivery

3 Unit description
The Easy-Control remote control EC 1 is a touch
display with an integrated room probe. Operation is
intuitive and self-explanatory due to its clear
arrangement. For example, to enter the desired
room temperature it is only necessary to touch the
“up/down” arrow keys. The anti-freeze protection
function or an absence program can also be set.
Using the room probe it is possible to realise room
temperature-guided regulation in the heating and
cooling mode. The installation is suitable for a
standard flush-mounted socket. Communication
with the heat pump takes place via a Modbus pro-
tocol.
The controller can be used as a wall-mounted
single-room controller
.
Fig. 2: Controller as wall-mounted single-room con-
troller
4 Scope of delivery
Description Quantity
Easy-Control EC 1 1
Fastening screws 4
Operating manual 1
REMKO remote controls
8