Rena Systems Rena Envelope Imager - Page 4

TABLE OF CONTENTS
Purging the Nozzles_______________________________________________________________ 41
JAMS IN THE PRINTER ________________________________________________________________ 41
Removing Jammed Media __________________________________________________________ 41
REPLACING THE SHEET SEPARATORS ____________________________________________________ 41
CLEANING THE PRINTER______________________________________________________________ 42
Cleaning Rubber Rollers ___________________________________________________________ 42
Cleaning the Media Sensor _________________________________________________________ 42
SECTION 5 – TROUBLESHOOTING GUIDE___________________________________________ 43
HP INKJET PRINT CARTRIDGES ________________________________________________________ 43
THE PRINTER ______________________________________________________________________ 44
PRINTER DISPLAY MESSAGES _________________________________________________________ 45
APPENDIX A – ENVELOPE IMAGER 1.5/1.5+ SPECIFICATIONS ________________________ 47
APPENDIX B – SUPPLIES, SERVICE AND SUPPORT___________________________________ 48
SUPPLIES AND OPTIONAL HARDWARE ___________________________________________________ 48
OBTAINING SUPPLIES, SERVICE AND SUPPORT_____________________________________________ 48
INDEX ____________________________________________________________________________ 49
Envelope Imager 1.5/1.5+ Operations Rev. 6/7/2007
3