Rena envelope imager III - Cleaning Transport Belts and Floor Assembly

Cleaning and Maintaining the Printer
User’s Manual - Revision C Section 5 - 4
Ink may get sprayed on the Transport Belts or Floor Assembly
from all the purging, setting up and printing records, etc. An
adequate amount of ink can accumulate on top of the
Transport Belts to give the belts a glossy sheen. Use water to
dampen a soft cotton cloth to remove the ink from the
Transport Belts and the Floor Assembly. Raise the Print Head
Assemblies up and out of the way to clean the Floor
Assembly.
Cleaning
the
Transport
Belts and
Floor
Assembly